Legacy: 9 MP Camera Specs
AR 51 9 MP system (legacy) — 8 parallel 10GigE cameras
AR 51 is a markerless motion capture solution that leverages RGB cameras and deep-learning algorithms to deliver real-time results. Our system processes data from 8 parallel 10GigE cameras, collectively generating 8.7 Gigapixels of data per second. This data is then meticulously handled by powerful GPUs. The substantial computational load demands high-end resources.
The hardware specifications of the AR 51 system have undergone rigorous testing. It's crucial to emphasize that any compromise in the quality of components could significantly impair the system's performance and speed.
PC Specification
Make sure the motherboard can support both two network cards and the GPU:
* Make sure there are free slots for 2 PCIe expansion cards. 4090/4080 cards are bulky and do not use water-cooling.
* The 2 additional PCIe slots should support a minimum of PCIe4 x4 mode
* Note that the extension card uses PCIe v4.0 x4 and also requires these SFP adapters
| Component | Example Type | Information |
|---|---|---|
| CPU | Intel Core i9 13900K / 1700 Tray | The CPU should have enough lanes to support network cards and the GPU. Should also support DDR5. |
| Motherboard | 1. ASUS ROG STRIX Z790-E GAMING WIFI 2. Asus Prime-x670-p 3. Gigabyte Z790-AORUS-ELITE-X-WIFI7 | Requirements: - PCIe 4 for RTX 4090 - 2× PCIe slots for a card (transmits 6 GB/s each, PCIe4 x4 mode) — a minimum for each slot |
| Water Cooling | Corsair iCUE H150i RGB PRO XT Liquid CPU Cooler | 4090 without water cooling is very bulky and does not leave space for the 2 pcie cards |
| Memory (RAM) | Corsair DDR5 64GB (32×2) 5600 | Minimum specs: DDR5 5600 MHz - The system requires a fast memory to transfer these multiple 9MP images to the GPU fast enough |
| Storage (HDD) | M.2 SSD 1.0TB | 512GB should also suffice. Do not use a SATA hard drive since it will take bandwidth from the PCIe. Also, make sure to position this SSD on the dedicated M.2-direct-to-CPU slot on the motherboard |
| GPU (RTX 4090) | AORUS GeForce RTX™ 4090 XTREME WATERFORCE 24G | To allow access to the other PCIe slots, a water-cooled 4090 variant is preferred. When not water-cooled, 4090 cards can be bulky and block the other PCIe slots. Ensure the motherboard has space for two additional PCIe network cards. |
| 2x PCI-e Network cards | LR-LINK PCI-e v4.0 x8 Quad Ports 4 SFP28 (25G Intel E810) Amazon, Alibaba |
:::note SFP+ connectors 8× SFP+ RJ45 80m connectors (efficient power consumption): Amazon.com, Amazon.co.jp, fs.com. PCIe v4.0 cards are required. These connectors can run hot — we recommend the 80m type for lower power consumption. :::